Penetration Grade – Bitumen 20/30
Penetration grade Bitumen 20/30 delivered by BUOYANCY™ is produced in compliance to EN 12591 Standards. Bitumen 20/30 is commonly used for the production of asphalt pavements with superior properties and for construction and maintenance of roads. It is also commonly used to manufacture asphalt mixes, bitumen emulsion, cut-back bitumen, and modified bitumen. Bitumen 20/30 has the highest boiling point, heaviest and most polar fraction from the vacuum distillation of crude oil. This grade of bitumen has very strong viscosity and plasticity compare to other grades which make it a great product in road paving sector for the realization of asphalt mixtures for roadways, runways, pavement, track race and landing platform.
All Grades Bitumen Exported by BUOYANCY™ are of petroleum grade, produced from fractional distillation of crude oil and vacuum residue (short residue) feedstock. The penetration grade bitumen has a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature-viscosity relationship is important when determining the performance parameters such as the rheology, adhesion, durability and application temperatures of bitumen.
Technical specifications (Typical) - EN 12591
Properties | Unit | Results | Test Methods |
Penetration @ 25 °C,100gm, 5sec | 0.1MM | 20-30 | EN 1426 |
Softening Point, Ring & Ball | °C | 55-63 | EN 1427 |
Flash point (Cleveland Open) | °C | 250 Min | EN 22592 |
Specific Gravity 25/25 ° C | – | 1.00-1.10 | EN ISO 3838 |
Penetration Index | – | -0.5 to +1.7 | EN 12591 Annexure A |
Solubility in CS2 | % wt | 99.5 | EN 12592 |
Dynamic viscosity @ 60⁰ C | mm2/s | 440 Min | EN 12596/EN13702 |
Kinematic Viscosity @ 135⁰C | mm2/s | 530 Min | EN 12596/EN13702 |
Resistance to hardening RTFOT | |||
Increase in softening Point | °C | ≤8 | EN 1427 |
Retained Penetration@25°C, Min | % | ≥55 | EN 1426 |
Softening point after hardening, Min | °C | 57 | EN12607-1 |
Change in Mass, Max | % wt | 0.5 | EN 12607-1 |
- Packing available: 150 ± 3 KG ,180 Kg ± 3, 200 Kg ±3 Net weight Steel drums and/or 300 Kg , 1000 Kg Polybags / Jumbo bags
- Storage and Handling Recommendations: Store in unopened containers. Storage temperature limits 1°C – 50°C. For normal operations, such as blending and transferring liquid bitumen, temperatures of 10°C – 40°C above the minimum pumping temperature are recommended.
- Approximate temperatures:
Storage 160-170°C
Mixing 160-180°C
Compaction 150-170°C
Penetration Grade – Bitumen 35/50
Penetration Grade Bitumen 35/50 is commonly used in road construction, surfacing and some industrial applications. All penetration grades supplied by BUOYANCY ™ are petroleum grade and manufactured from fractional / vacuum distillation of crude oil produced from vacuum residue feedstock. They are fully compliant to ASTM and AASHTO, equivalent to EN and BS international standards and test methods. Penetration Grade bitumen are specified by the penetration and softening point test.
The penetration grade bitumen has a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen. Penetration grade bitumen is also used to manufacture asphalt mixes, cutback bitumen, emulsions and modified grades.
TECHNICAL SPECIFICATIONS (Typical) – EN 12591
PROPERTIES | Units | Results | Test Methods |
Penetration @25°C, 100g/ 5s | 0.1mm | 35-50 | EN 1426 |
Softening Point, Ring & Ball | °C | 50-58 | EN 1427 |
Resistance to Hardening@163°C | |||
Change in Mass, Max | %Wt | 0.5 | EN 12607-1 |
Retained Penetration@25°C, Min | 0.1mm | 53 | EN12607-1 |
Softening point after hardening, Min | °C | 52 | EN12607-1 |
Other Properties | |||
Flash Point Cleveland open cup, Min | °C | 240 | EN ISO 22592 |
Solubility in CS2, Min | %Wt | 99.5 | EN 12592 |
Kinematic viscosity @135 °C ,Min | mm2/s | 370 | EN12592 |
Paraffin Wax Content, Max | %Wt | 4.5 | EN12606-2 |
Penetration Index | – | -0.5 to +1.7 | EN 12591 Annexure A |
- Packing available: 150 ± 3 KG ,180 Kg ± 3, 200 Kg ±3 Net weight Steel drums and/or 300 Kg , 1000 Kg Polybags / Jumbo bags
- Storage and Handling Recommendations: Store in unopened containers. Storage temperature limits 1°C – 50°C. For normal operations, such as blending and transferring liquid bitumen, temperatures of 10°C – 40°C above the minimum pumping temperature are recommended.
- Recommended Application Temperatures:
Storing: 120°C – 150°C
Mixing: 135°C – 155°C
Compacting: 125°C – 145°C
Penetration Grade – Bitumen 40/60
Penetration Grade Bitumen 40/60 is commonly used in road construction, surfacing and some industrial applications. All penetration grades supplied by BUOYANCY ™ are petroleum grade and manufactured from fractional / vacuum distillation of crude oil produced from vacuum residue feedstock. They are fully compliant to ASTM and AASHTO, equivalent to EN and BS international standards and test methods. Penetration Grade bitumen are specified by the penetration and softening point test.
The penetration grade bitumen has a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen. Penetration grade bitumen is also used to manufacture asphalt mixes, cutback bitumen, emulsions and modified grades.
TECHNICAL SPECIFICATIONS (Typical) – EN 12591
PROPERTIES | Units | Results | Test Methods |
Penetration @25°C, 100g/ 5s | 0.1mm | 40-60 | EN 1426 |
Softening Point, Ring & Ball | °C | 48-56 | EN 1427 |
Resistance to Hardening@163°C | |||
Change in Mass, Max | %Wt | 0.5 | EN 12607-1 |
Retained Penetration@25°C, Min | 0.1mm | 50 | EN12607-1 |
Softening point after hardening, Min | °C | 49 | EN12607-1 |
Other Properties | |||
Flash Point Cleveland open cup, Min | °C | 240 | EN ISO 22592 |
Solubility in CS2, Min | %Wt | 99.5 | EN 12592 |
Kinematic viscosity @135 °C ,Min | mm2/s | 325 | EN12592 |
Paraffin Wax Content, Max | % Wt | 4.5 | EN12606-2 |
Penetration Index | – | -1.5 to 0.7 | EN12591-Annexure A |
- Packing available: 150 ± 3 KG ,180 Kg ± 3, 200 Kg ±3 Net weight Steel drums and/or 300 Kg , 1000 Kg Polybags / Jumbo bags
- Storage and Handling Recommendations: Store in unopened containers. Storage temperature limits 1°C – 50°C. For normal operations, such as blending and transferring liquid bitumen, temperatures of 10°C – 40°C above the minimum pumping temperature are recommended.
- Recommended Application Temperatures:
Storing: 120ºC – 150ºC
Mixing: 135ºC – 155ºC
Compacting: 125ºC – 145ºC
Penetration Grade – Bitumen 50/70
Penetration Grade Bitumen 50/70 is commonly used in road construction, surfacing and some industrial applications. All penetration grades supplied by BUOYANCY ™ are petroleum grade and manufactured from fractional / vacuum distillation of crude oil produced from vacuum residue feedstock. They are fully compliant to ASTM and AASHTO, equivalent to EN and BS international standards and test methods. Penetration Grade bitumen are specified by the penetration and softening point test. The penetration grade bitumen has a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen. Penetration grade bitumen is also used to manufacture asphalt mixes, cutback bitumen, emulsions and modified grades.
TECHNICAL SPECIFICATIONS (Typical) – EN 12591
PROPERTIES | Units | 50/70 | Test Methods |
Penetration @25°C, 100g/ 5s | 0.1mm | 50-70 | EN 1426 |
Softening Point, Ring & Ball | °C | 46-54 | EN 1427 |
Resistance to Hardening@163°C | |||
Change in Mass, Max | % Wt | 0.5 | EN 12607-1 |
Retained Penetration@25°C, Min | 0.1mm | 50 | EN12607-1 |
Softening point after hardening, Min | °C | 48 | EN12607-1 |
Other Properties | |||
Flash Point Cleveland open cup, Min | °C | 240 | EN ISO 22592 |
Solubility in CS2, Min | %Wt | 99.5 | EN 12592 |
Kinematic viscosity @135 °C ,Min | mm2/s | 295 | EN12592 |
Paraffin Wax Content, Max | %Wt | 4.5 | EN12606-2 |
Penetration Index | – | -1.5 to +0.7 | EN12591- Annexure A |
- Packing available: 150 ± 3 KG ,180 Kg ± 3, 200 Kg ±3 Net weight Steel drums and/or 300 Kg, 1000 Kg Polybags / Jumbo bags
- Storage and Handling Recommendations: Store in unopened containers. Storage temperature limits 1°C – 50°C. For normal operations, such as blending and transferring liquid bitumen, temperatures of 10°C – 40°C above the minimum pumping temperature are recommended.
- Recommended Application Temperatures: Asphalt mixing temperature: 150°C – 160°C.
- Asphalt compaction temperature: 135°C – 145°C.
Penetration Grade – Bitumen 60/70
Penetration grade Bitumen 60/70 delivered by BUOYANCY™ is produced in compliance to AASTHO M20-70 and ASTM D946/D946M Standards. Bitumen 60/70 is commonly used for the production of asphalt pavements with superior properties and for construction and maintenance of roads. It is also commonly used to manufacture asphalt mixes, bitumen emulsion, cut-back bitumen, and modified bitumen. Bitumen 60/70 has the highest boiling point, heaviest and most polar fraction from the vacuum distillation of crude oil and is composed of asphaltene and maltene. The heavy insoluble asphaltene molecules give bitumen 60/70 its body and softening point while the maltenes are oily and make asphalt flexible.
All Penetration Grades Bitumen Exported by BUOYANCY™ are of petroleum grade, produced from fractional distillation of crude oil and vacuum residue (short residue) feedstock. The penetration grade bitumen has a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature-viscosity relationship is important when determining the performance parameters such as the rheology, adhesion, durability and application temperatures of bitumen.
Technical Specifications (Typical)
PROPERTIES | Units | Result | Test Methods |
Specific Gravity @25°C | – | 1.01-1.05 | ASTM D-70 |
Penetration @25°C, 100gm, 5sec | 0.1MM | 60-70 | ASTM D-5 |
Softening Point, Ring & Ball | °C | 46 Min | ASTM D-36 |
Ductility @25°C after TFOT | CM | 100 | ASTM D-113 |
Loss on Heating, Max | %WT | 0.2Max | ASTM D-6 |
Drop in Penetration after heating | % | 20 Max | ASTMD 5 |
Flash Point | °C | 232 min | ASTM D-92 |
Solubility in Trichloroethylene | %WT | 99.9 | ASTM D-4 |
Kinematic Viscosity at 60°C | P | 2000±400 | ASTMD2171 |
Kinematic Viscosity at 135° C | Cst | 300 Min | ASTMD2170 |
Spot Test | |||
Standard Naptha Solvent | % | Negative | AASHTO T102 |
Naptha –Xylene Solvent | % | Negative | AASHTO T102 |
Heptane Xylene Solvent | % | Negative | AASHTO T102 |
Spot Test | — | Negative | AASHTO T102 |
- Equivalent to BS EN 12591 and BS EN 13924 standards
- Packing available: 150 ± 3 KG ,180 Kg ± 3, 200 Kg ±3 Net weight Steel drums and/or 300 Kg , 1000 Kg Polybags / Jumbo bags
- Storage and Handling Recommendations: Store in unopened containers. Storage temperature limits 1°C – 50°C. For normal operations, such as blending and transferring liquid bitumen, temperatures of 10°C – 40°C above the minimum pumping temperature are recommended.
- Recommended Application Temperatures:
Storing: 120°C – 150°C
Mixing: 135°C – 155°C
Compacting: 125°C – 145°C
Penetration Grade – Bitumen 70/100
Penetration Grade Bitumen 70/100 is commonly used in road construction, surfacing and some industrial applications. All penetration grades supplied by BUOYANCY ™ are petroleum grade and manufactured from fractional / vacuum distillation of crude oil produced from vacuum residue feedstock. They are fully compliant to ASTM and AASHTO, equivalent to EN and BS international standards and test methods. Penetration Grade bitumen are specified by the penetration and softening point test. The penetration grade bitumen has a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen. Penetration grade bitumen is also used to manufacture asphalt mixes, cutback bitumen, emulsions and modified grades.
TECHNICAL SPECIFICATIONS (Typical) – EN 12591
PROPERTIES | Units | 70/100 | Test Methods |
Penetration @25°C, 100g/ 5s | 0.1mm | 70-100 | EN 1426 |
Softening Point, Ring & Ball | °C | 43-51 | EN 1427 |
Resistance to Hardening@163°C | |||
Change in Mass | % | 0.8 | EN 12607-1 |
Retained Penetration@25°C | 0.1mm | 46 | EN12607-1 |
Softening point after hardening, Min | °C | 45 | EN12607-1 |
Other Properties | |||
Flash Point Cleveland open cup, Min | °C | 240 Min | EN ISO 22592 |
Solubility in CS2,Min | %Wt | 99.0 | EN 12592 |
Kinematic viscosity @135 °C | mm2/s | 230 | EN12592 |
Paraffin Wax Content, Max | %Wt | 4.5 Max | EN12606-2 |
Penetration Index | – | -1.5 to 0.7 | EN12591-Annexure A |
- Packing available: 150 ± 3 KG ,180 Kg ± 3, 200 Kg ±3 Net weight Steel drums and/or 300 Kg , 1000 Kg Polybags / Jumbo bags
- Storage and Handling Recommendations: Store in unopened containers. Storage temperature limits 1°C – 50°C. For normal operations, such as blending and transferring liquid bitumen, temperatures of 10°C – 40°C above the minimum pumping temperature are recommended.
- Recommended Application Temperatures: Asphalt mixing temperature: 150°C – 160°C.
- Asphalt compaction temperature: 135°C – 145°C.
Penetration Grade – Bitumen 70/100
Penetration Grade Bitumen 100/150 is commonly used in road construction, surfacing and some industrial applications. All penetration grades supplied by BUOYANCY ™ are petroleum grade and manufactured from fractional / vacuum distillation of crude oil produced from vacuum residue feedstock. They are fully compliant to ASTM and AASHTO, equivalent to EN and BS international standards and test methods. Penetration Grade bitumen are specified by the penetration and softening point test. The penetration grade bitumen has a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. Bitumen 100/150 is used in the construction of single seals, double seals and Cape seals, either as a tack coat or penetration spray. It is also used as the base bitumen for the manufacture of the majority of asphalt mixes, cutback bitumen, emulsions and polymer modified binders.
TECHNICAL SPECIFICATIONS (Typical) – EN 12591
PROPERTIES | Units | 100/150 | Test Methods |
Penetration @25°C, 100g/ 5s | 0.1mm | 70-100 | EN 1426 |
Softening Point, Ring & Ball | °C | 39-47 | EN 1427 |
Resistance to Hardening@163°C | |||
Change in Mass | %wt | 0.8 | EN 12607-1 |
Retained Penetration@25°C | 0.1mm | 43 | EN12607-1 |
Softening point after hardening, Min | °C | 41 | EN12607-1 |
Other Properties | |||
Flash Point Cleveland open cup, Min | °C | 230 | EN ISO 22592 |
Solubility in CS2,Min | %Wt | 99.0 | EN 12592 |
Kinematic viscosity @135 °C | mm2/s | 175 | EN12592 |
Paraffin Wax Content, Max | %Wt | 4.5 | EN12606-2 |
Penetration Index | – | -1.5 to 0.7 | EN12591-Annexure A |
- Packing available: 150 ± 3 KG ,180 Kg ± 3, 200 Kg ±3 Net weight Steel drums and/or 300 Kg , 1000 Kg Polybags / Jumbo bags
- Storage and Handling Recommendations: Store in unopened containers. Storage temperature limits 1°C – 50°C. For normal operations, such as blending and transferring liquid bitumen, temperatures of 10°C – 40°C above the minimum pumping temperature are recommended.
- Recommended Application Temperatures: Asphalt mixing temperature: 150°C – 160°C.
- Asphalt compaction temperature: 135°C – 145°C.
Penetration Grade – Bitumen 160/220
Paving grade Bitumen 160/220 delivered by BUOYANCY™ is produced in compliance to EN 12591 Standards. Bitumen 160/220 is commonly used for the production of asphalt pavements with superior properties and for construction and maintenance of roads. It is also commonly used to manufacture asphalt mixes, bitumen emulsion, cut-back bitumen, and modified bitumen. This grade of bitumen is used for road paving sector for the realization of asphalt mixtures for roadways, runways, pavement, track race and landing platform.
All Grades Bitumen Exported by BUOYANCY™ are of petroleum grade, produced from fractional distillation of crude oil and vacuum residue (short residue) feedstock. The penetration grade bitumen has a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature-viscosity relationship is important when determining the performance parameters such as the rheology, adhesion, durability and application temperatures of bitumen.
Technical specifications & data report
PROPERTIES | UNIT | RESULT | Test Methods |
Penetration @ 25 °C,100gm, 5sec | 0.1MM | 160-220 | EN 1426 |
Softening Point, Ring & Ball | °C | 35-43 | EN 1427 |
Flash point ( Cleveland Open) | °C | 220 Min | EN 22592 |
Specific Gravity 25/25 ° C | – | 1.00 -1.07 | EN ISO 3838 |
Penetration Index | – | -0.5 to +1.7 | EN 12591 Annexure A |
Solubility in CS2 | % wt | 99.5 | EN 12592 |
Dynamic viscosity @ 60⁰C | mm2/s | 30 | EN 12596/EN13702 |
Dynamic Viscosity @ 135⁰C | mm2/s | 135 | EN 12596/EN13702 |
Resistance to hardening RTFOT Method test to EN 12607-1 | |||
Increase in softening Point (R&B) | °C | 37 | EN 1427 |
Retained Penetration@25°C, Min | % wt | 37 | EN 1426 |
Change in Mass, Max | % wt | 1.0 | EN 12607-1 |
Softening Point after hardening | °C | 12 | EN 1427 |
- Packing available: 150 ± 3 KG ,180 Kg ± 3, 200 Kg ±3 Net weight Steel drums and/or 300 Kg , 1000 Kg Polybags / Jumbo bags
- Storage and Handling Recommendations: Store in unopened containers. Storage temperature limits 1°C – 50°C. For normal operations, such as blending and transferring liquid bitumen, temperatures of 10°C – 40°C above the minimum pumping temperature are recommended.
- Approximate temperatures:
Storage 160-170°C
Mixing 160-180°C
Compaction 150-170°C
Penetration Grade – Bitumen 170/210
Paving grade Bitumen 170/210 delivered by BUOYANCY™ is produced in compliance to EN 12591 Standards. Bitumen 170/210 is commonly used for the production of asphalt pavements with superior properties and for construction and maintenance of roads. It is also commonly used to manufacture asphalt mixes, bitumen emulsion, cut-back bitumen, and modified bitumen. This grade of bitumen is used for road paving sector for the realization of asphalt mixtures for roadways, runways, pavement, track race and landing platform.
All Grades Bitumen Exported by BUOYANCY™ are of petroleum grade, produced from fractional distillation of crude oil and vacuum residue (short residue) feedstock. The penetration grade bitumen has a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature-viscosity relationship is important when determining the performance parameters such as the rheology, adhesion, durability and application temperatures of bitumen.
Technical specifications & data report
PROPERTIES | UNIT | RESULT | Test Methods |
Penetration @ 25 °C,100gm, 5sec | 0.1MM | 170-210 | EN 1426 |
Softening Point, Ring & Ball | °C | 35-43 | EN 1427 |
Flash point ( Cleveland Open) | °C | 250 Min | EN 22592 |
Specific Gravity 25/25 ° C | – | 1.00 -1.07 | EN ISO 3838 |
Penetration Index | – | -0.5 to +1.7 | EN 12591 Annexure A |
Solubility in CS2 | % wt | 99.5 | EN 12592 |
Dynamic viscosity @ 60⁰C | mm2/s | 30 | EN 12596/EN13702 |
Dynamic Viscosity @ 135⁰C | mm2/s | 135 | EN 12596/EN13702 |
Resistance to hardening RTFOT | |||
Increase in softening Point | °C | 11 | EN 1427 |
Retained Penetration@25°C, Min | % | 37 | EN 1426 |
Change in Mass, Max | % wt | 1 | EN 12607-1 |
- Packing available: 150 ± 3 KG ,180 Kg ± 3, 200 Kg ±3 Net weight Steel drums and/or 300 Kg , 1000 Kg Polybags / Jumbo bags
- Storage and Handling Recommendations: Store in unopened containers. Storage temperature limits 1°C – 50°C. For normal operations, such as blending and transferring liquid bitumen, temperatures of 10°C – 40°C above the minimum pumping temperature are recommended.
- Approximate temperatures:
Storage 160-170°C
Mixing 160-180°C
Compaction 150-170°C
Penetration Grade – Bitumen 250/330
Paving grade Bitumen 250/330 delivered by BUOYANCY™ is produced in compliance to EN 12591 Standards. Bitumen 250/3330 is commonly used for the production of asphalt pavements with superior properties and for construction and maintenance of roads. It is also commonly used to manufacture asphalt mixes, bitumen emulsion, cut-back bitumen, and modified bitumen. This grade of bitumen is used for road paving sector for the realization of asphalt mixtures for roadways, runways, pavement, track race and landing platform.
All Grades Bitumen Exported by BUOYANCY™ are of petroleum grade, produced from fractional distillation of crude oil and vacuum residue (short residue) feedstock. The penetration grade bitumen has a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature-viscosity relationship is important when determining the performance parameters such as the rheology, adhesion, durability and application temperatures of bitumen.
Technical specifications & data report
PROPERTIES | UNIT | RESULT | Test Methods |
Penetration @ 25 °C,100gm, 5sec | 0.1MM | 250-330 | EN 1426 |
Softening Point, Ring & Ball | °C | 30-48 | EN 1427 |
Flash point ( Cleveland Open) | °C | 220 Min | EN 22592 |
Specific Gravity 25/25 ° C | – | 1.00 -1.07 | EN ISO 3838 |
Penetration Index | – | -0.5 to +1.7 | EN 12591 Annexure A |
Solubility in CS2 | % wt | 99.0 | EN 12592 |
Dynamic viscosity @ 60⁰C | mm2/s | 18 | EN 12596/EN13702 |
Dynamic Viscosity @ 135⁰C | mm2/s | 100 | EN 12596/EN13702 |
Resistance to hardening RTFOT at 163°C | |||
Softening point after hardening | °C | 32 | EN 1427 |
Retained Penetration@25°C, Min | % | 35 | EN 1426 |
Change in Mass, Max | % wt | 1 | EN 12607-1 |
- Packing available: 150 ± 3 KG ,180 Kg ± 3, 200 Kg ±3 Net weight Steel drums and/or 300 Kg , 1000 Kg Polybags / Jumbo bags
- Storage and Handling Recommendations: Store in unopened containers. Storage temperature limits 1°C – 50°C. For normal operations, such as blending and transferring liquid bitumen, temperatures of 10°C – 40°C above the minimum pumping temperature are recommended.
- Approximate temperatures:
Storage 160-170°C
Mixing 160-180°C
Compaction 150-170°C
Maximum Handling /Storage temperature: 190°C – 200°C
Penetration Grade Bitumen 40/50
Penetration grade Bitumen 40/50 delivered by BUOYANCY™ is produced in compliance to AASTHO M20-70 and ASTM D946/D946M Standards. Bitumen 40/50 is commonly used for the production of asphalt pavements with superior properties and for construction and maintenance of roads. It is also commonly used to manufacture asphalt mixes, bitumen emulsion, cut-back bitumen, and modified bitumen.
All Penetration Grades Bitumen Exported by BUOYANCY™ are of petroleum grade, produced from fractional distillation of crude oil and vacuum residue (short residue) feedstock. The penetration grade bitumen has a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature-viscosity relationship is important when determining the performance parameters such as the rheology, adhesion, durability and application temperatures of bitumen.
Technical Specifications (Typical)
PROPERTIES | Units | 40/50 | Test Methods |
Specific Gravity @25°C | – | 1.01-1.05 | ASTM D-70 |
Penetration @25°C, 100gm, 5sec | 0.1MM | 40-50 | AASHTO T49 |
Softening Point, Ring & Ball | °C | 52-60 | ASTM D-36 |
Ductility of residue @25°C | CM | 100 | AASHTO T51 |
Loss on Heating, Max | %WT | 0.2 | AASHTO T179 |
Drop in penetration after heating, Max | % | 20 | AASHTO T49 |
Flash Point | °C | 250 | AASHTO T48 |
Solubility in Trichloroethylene | %WT | 99.9 | AASHTO T2044 |
Organic Matter Insoluble in CS2, Max | %WT | 0.5 | ASTM D-4 |
Spot Test | |||
Standard Naptha Solvent | % | Negative | AASHTO T102 |
Naptha –Xylene Solvent | % | Negative | AASHTO T102 |
Heptane Xylene Solvent | % | Negative | AASHTO T102 |
Spot Test | — | Negative | AASHTO T102 |
- Equivalent to BS EN 12591 and BS EN 13924 standards
- Packing available: 150 ± 3 KG ,180 Kg ± 3, 200 Kg ±3 Net weight Steel drums and/or 300 Kg , 1000 Kg Polybags / Jumbo bags
- Storage and Handling Recommendations: Store in unopened containers. Storage temperature limits 1°C – 50°C. For normal operations, such as blending and transferring liquid bitumen, temperatures of 10°C – 40°C above the minimum pumping temperature are recommended.
- Recommended Application Temperatures:
Storing: 120°C – 150°C
Mixing: 135°C – 155°C
Compacting: 125°C – 145°C
Penetration Grade Bitumen 40/50
Penetration grade Bitumen 80/100 delivered by BUOYANCY™ is produced in compliance to AASTHO M20-70 and ASTM D946/D946M Standards. Bitumen 80/100 is commonly used for the production of asphalt pavements with superior properties and for construction and maintenance of roads. It is also commonly used to manufacture asphalt mixes, bitumen emulsion, cut-back bitumen, and modified bitumen. Bitumen 80/100 has the highest boiling point, heaviest and most polar fraction from the vacuum distillation of crude oil and is composed of asphaltene and maltene. The heavy insoluble asphaltene molecules give bitumen 80/100 its body and softening point while the maltenes are oily and make asphalt flexible.
All Penetration Grades Bitumen Exported by BUOYANCY™ are of petroleum grade, produced from fractional distillation of crude oil and vacuum residue (short residue) feedstock. The penetration grade bitumen has a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature-viscosity relationship is important when determining the performance parameters such as the rheology, adhesion, durability and application temperatures of bitumen.
Technical Specifications (Typical)
PROPERTIES | Units | 80/100 | Test Methods |
Specific Gravity @25°C | – | 1.01-1.05 | ASTM D-70 |
Penetration @25°C, 100gm, 5sec | 0.1MM | 80-100 | AASHTO T49 |
Softening Point, Ring & Ball | °C | 45-52 | ASTM D-36 |
Ductility of residue @25°C | CM | 100 | AASHTO T51 |
Loss on Heating, Max | %WT | 0.10 | AASHTO T179 |
Penetration of residue % of the original | % | 77 | AASHTO T49 |
Flash Point | °C | 328 | AASHTO T48 |
Solubility in Trichloroethylene | %WT | 99.9 | AASHTO T2044 |
Spot Test | |||
Standard Naptha Solvent | % | Negative | AASHTO T102 |
Naptha –Xylene Solvent | % | Negative | AASHTO T102 |
Heptane Xylene Solvent | % | Negative | AASHTO T102 |
Spot Test | — | Negative | AASHTO T102 |
- Equivalent to BS EN 12591 and BS EN 13924 standards
- Packing available: 150 ± 3 KG ,180 Kg ± 3, 200 Kg ±3 Net weight Steel drums and/or 300 Kg , 1000 Kg Polybags / Jumbo bags
- Storage and Handling Recommendations: Store in unopened containers. Storage temperature limits 1°C – 50°C. For normal operations, such as blending and transferring liquid bitumen, temperatures of 10°C – 40°C above the minimum pumping temperature are recommended
- Recommended Application Temperatures:
Storing: 120°C – 150°C
Mixing: 135°C – 155°C
Compacting: 125°C – 145°C
Penetration Grade Bitumen 100/120
Penetration grade Bitumen 100/120 delivered by BUOYANCY™ is produced in compliance to AASTHO M20-70 and ASTM D946/D946M Standards. Bitumen 100/120 is commonly used for the production of asphalt pavements with superior properties and for construction and maintenance of roads. It is also commonly used to manufacture asphalt mixes, bitumen emulsion, cut-back bitumen, and modified bitumen.
All Penetration Grades Bitumen Exported by BUOYANCY™ are of petroleum grade, produced from fractional distillation of crude oil and vacuum residue (short residue) feedstock. The penetration grade bitumen has a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature-viscosity relationship is important when determining the performance parameters such as the rheology, adhesion, durability and application temperatures of bitumen.
Technical Specifications (Typical)
PROPERTIES | Units | Results | Test Methods |
Specific Gravity @25°C | – | 1.01-1.05 | ASTM D-70 |
Penetration @25°C, 100gm, 5sec | 0.1MM | 100-120 | ASTMD-5 |
Softening Point, Ring & Ball | °C | 42-49 | ASTM D-36 |
Ductility of residue @25°C after TFOT | CM | 100 | ASTMD-113 |
Loss on Heating, Max | %WT | 0.5 Max | ASTMD-6 |
Drop in penetration after heating | Cst | 20 Max | ASTMD6 & 5 |
Flash Point | °C | 250 min | ASTMD-92 |
Solubility in Trichloroethylene | %WT | 99.9 | ASTMD 2042 |
Spot Test | |||
Standard Naptha Solvent | % | Negative | AASHTO T102 |
Naptha –Xylene Solvent | % | Negative | AASHTO T102 |
Heptane Xylene Solvent | % | Negative | AASHTO T102 |
Spot Test | — | Negative | AASHTO T102 |
- Equivalent to BS EN 12591 and BS EN 13924 standards
- Packing available: 150 ± 3 KG ,180 Kg ± 3, 200 Kg ±3 Net weight Steel drums and/or 300 Kg , 1000 Kg Polybags / Jumbo bags
- Storage and Handling Recommendations: Store in unopened containers. Storage temperature limits 1°C – 50°C. For normal operations, such as blending and transferring liquid bitumen, temperatures of 10°C – 40°C above the minimum pumping temperature are recommended.
- Recommended Storage & Handling Temperatures:
Minimum Pumping Temperature: 105°C
Storage Temperature When Coating or Mixing: 150°C
Protracted Storage Temperature: 70°C
Maximum Handling & Storage Temperature: 200°C
Penetration Grade Bitumen 120/150
Penetration grade Bitumen 120/150 delivered by BUOYANCY™ is produced in compliance to AASTHO M20-70 and ASTM D946/D946M Standards. Bitumen 120/150 is commonly used for the production of asphalt pavements with superior properties and for construction and maintenance of roads. It is also commonly used to manufacture asphalt mixes, bitumen emulsion, cut-back bitumen, and modified bitumen. Bitumen 120/150 has the highest boiling point, heaviest and most polar fraction from the vacuum distillation of crude oil.
All Penetration Grades Bitumen Exported by BUOYANCY™ are of petroleum grade, produced from fractional distillation of crude oil and vacuum residue (short residue) feedstock. The penetration grade bitumen has a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature-viscosity relationship is important when determining the performance parameters such as the rheology, adhesion, durability and application temperatures of bitumen.
Technical Specifications (Typical)
PROPERTIES | Units | Results | Test Methods |
Specific Gravity @25°C | – | 1.01-1.05 | ASTM D-70 |
Penetration @25°C, 100gm, 5sec | 0.1MM | 120-150 | ASTMD-5 |
Softening Point, Ring & Ball | °C | 40-45 | ASTM D-36 |
Ductility of residue @25°C after TFOT | CM | 100 | ASTMD-113 |
Loss on Heating, Max | %WT | 0.5 Max | ASTMD-6 |
Kinematic viscosity at 135°C | Cst | 175 | ASTMD-2170 |
Flash Point | °C | 220 Min | ASTMD-92 |
Solubility in Trichloroethylene | %WT | 99.9 | ASTMD 2042 |
Spot Test | |||
Standard Naptha Solvent | % | Negative | AASHTO T102 |
Naptha –Xylene Solvent | % | Negative | AASHTO T102 |
Heptane Xylene Solvent | % | Negative | AASHTO T102 |
Spot Test | — | Negative | AASHTO T102 |
- Equivalent to BS EN 12591 and BS EN 13924 standards
- Packing available: 150 ± 3 KG ,180 Kg ± 3, 200 Kg ±3 Net weight Steel drums and/or 300 Kg , 1000 Kg Polybags / Jumbo bags
- Storage and Handling Recommendations: Store in unopened containers. Storage temperature limits 1°C – 50°C. For normal operations, such as blending and transferring liquid bitumen, temperatures of 10°C – 40°C above the minimum pumping temperature are recommended.
- Recommended Application Temperatures:
Storing: 120°C – 150°C
Mixing: 135°C – 155°C
Compacting: 125°C – 145°C
Penetration Grade Bitumen 150/200
Penetration grade Bitumen 150/200 delivered by BUOYANCY™ is produced in compliance to AASTHO M20-70 and ASTM D946/D946M Standards. Bitumen 150/200 is commonly used for the production of asphalt pavements with superior properties and for construction and maintenance of roads. It is also commonly used to manufacture asphalt mixes, bitumen emulsion, cut-back bitumen, and modified bitumen. Bitumen 150/200 has the highest boiling point, heaviest and most polar fraction from the vacuum distillation of crude oil.
All Penetration Grades Bitumen Exported by BUOYANCY™ are of petroleum grade, produced from fractional distillation of crude oil and vacuum residue (short residue) feedstock. The penetration grade bitumen has a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature-viscosity relationship is important when determining the performance parameters such as the rheology, adhesion, durability and application temperatures of bitumen.
Technical Specifications (Typical)
PROPERTIES | Units | Results | Test Methods |
Specific Gravity @25°C | – | 1.01-1.05 | ASTM D-70 |
Penetration @25°C, 100gm, 5sec | 0.1MM | 150-200 | ASTMD-5 |
Softening Point, Ring & Ball | °C | 38-44 | ASTM D-36 |
Ductility of residue @25°C after TFOT | CM | 100 | ASTMD-113 |
Loss on Heating, Max | %WT | 0.5 Max | ASTMD-6 |
Kinematic viscosity at 60°C | Cst | 250±50 | ASTMD-2171 |
Kinematic viscosity at 135°C | Cst | 175 | ASTMD-2170 |
Flash Point | °C | 218 min | ASTMD-92 |
Solubility in Trichloroethylene | %WT | 99.9 | ASTMD 2042 |
Drop in Penetration after heating | % | 20 Max | ASTMD-5 |
Retained Penetration after (TFOT) | % | 46 Min | ASTMD-5 |
Spot Test | |||
Standard Naptha Solvent | % | Negative | AASHTO T102 |
Naptha –Xylene Solvent | % | Negative | AASHTO T102 |
Heptane Xylene Solvent | % | Negative | AASHTO T102 |
Spot Test | — | Negative | AASHTO T102 |
- Equivalent to BS EN 12591 and BS EN 13924 standards
- Packing available: 150 ± 3 KG ,180 Kg ± 3, 200 Kg ±3 Net weight Steel drums and/or 300 Kg , 1000 Kg Polybags / Jumbo bags
- Storage and Handling Recommendations: Store in unopened containers. Storage temperature limits 1°C – 50°C. For normal operations, such as blending and transferring liquid bitumen, temperatures of 10°C – 40°C above the minimum pumping temperature are recommended.
- Recommended Application Temperatures:
Storing: 120°C – 150°C
Mixing: 135°C – 155°C
Compacting: 125°C – 145°C
Penetration Grade Bitumen 200/300
Penetration grade Bitumen 200/300 delivered by BUOYANCY™ is produced in compliance to AASTHO M20-70 and ASTM D946/D946M Standards. Bitumen 200/300 is commonly used for the production of asphalt pavements with superior properties and for construction and maintenance of roads. It is also commonly used to manufacture asphalt mixes, bitumen emulsion, cut-back bitumen, and modified bitumen.
All Penetration Grades Bitumen Exported by BUOYANCY™ are of petroleum grade, produced from fractional distillation of crude oil and vacuum residue (short residue) feedstock. The penetration grade bitumen has a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature-viscosity relationship is important when determining the performance parameters such as the rheology, adhesion, durability and application temperatures of bitumen.
Technical Specifications (Typical)
PROPERTIES | Units | Results | Test Methods |
Specific Gravity @25°C | – | 0.99-1.04 | ASTM D-70 |
Penetration @25°C, 100gm, 5sec | 0.1MM | 200-300 | ASTMD-5 |
Softening Point, Ring & Ball | °C | 30-40 | ASTM D-36 |
Ductility of residue @25°C after TFOT | CM | 100 | ASTMD-113 |
Loss on Heating, Max | %WT | 1.0 Max | ASTMD-6 |
Kinematic viscosity at 60°C | Cst | 200±50 | ASTMD-2171 |
Kinematic viscosity at 135°C | Cst | 80 Min | ASTMD-2170 |
Flash Point | °C | 177 min | ASTMD-92 |
Solubility in Trichloroethylene | %WT | 99.9 | ASTMD 2042 |
Drop in Penetration after heating | % | 37 Min | ASTMD-5 |
Retained Penetration after (TFOT) | % | 40 Min | ASTMD-5 |
Spot Test | |||
Standard Naptha Solvent | % | Negative | AASHTO T102 |
Naptha –Xylene Solvent | % | Negative | AASHTO T102 |
Heptane Xylene Solvent | % | Negative | AASHTO T102 |
Spot Test | — | Negative | AASHTO T102 |
- Equivalent to BS EN 12591 and BS EN 13924 standards
- Packing available: 150 ± 3 KG ,180 Kg ± 3, 200 Kg ±3 Net weight Steel drums and/or 300 Kg , 1000 Kg Polybags / Jumbo bags
- Storage and Handling Recommendations: Store in unopened containers. Storage temperature limits 1°C – 50°C. For normal operations, such as blending and transferring liquid bitumen, temperatures of 10°C – 40°C above the minimum pumping temperature are recommended.
- Recommended Application Temperatures:
Storing: 120°C – 150°C
Mixing: 135°C – 155°C
Compacting: 125°C – 145°C
Buoyancy
Innovating to meet tomorrow’s challenges. Meet the revolution
We’re continually working to change the way people think about and engage with our products.